Manucomp Systems
Hours of Operation

Monday to Friday:
9am - 6pm EST

Saturday & Sunday:

If you would like additional information please contact us toll-free at :


Can't find the product you are looking for?
Request a quote.
Modem Support
Back to Cisco Tips

Your switch router has a console terminal line that you might need to configure. For line configuration, you must first set up the line for the terminal or the asynchronous device attached to it. For a complete description of configuration tasks and commands used to set up your terminal line and settings, refer to the Cisco IOS Configuration Fundamentals Configuration Guide and Cisco IOS Dial Solutions Configuration Guide.

You can connect a modem to the console port or to the auxiliary port on the switch router. The following settings on the modem are required:

- Enable auto answer mode

- Suppress result codes

ou can configure your modem by setting the DIP switches on the modem or by connecting the modem to terminal equipment. Refer to the user manual provided with your modem for the correct configuration information.

Note - Because there are no hardware flow control signals available on the console port, the console port terminal characteristics should match the modem settings.